Best Christmas Tree Stands in 2021
Getting the right Christmas tree stand can be as hard as walking through a maze, especially if you need to bit the Christmas shopping rush. This can be a tense situation especially if you want to avoid the tackier methods like simply dipping it in a plastic bin full of sand and making the whole affair seem rushed. You can however go through this list of the best Christmas tree stands in 2021 to ensure that you can pick an item that has the right features and benefits to suit your needs.
List of the Best Christmas Tree Stands in 2021
10. Omega Christmas tree stand
The Omega Christmas tree stand ensures that all the users can set them up within minutes all the while avoiding cumbersome screws or worse still…missing screws. The stand is designed to fit in Christmas trees of different thickness so that you do not have to stick to a specific tree size every year. It is made of a unique clamping system that is easy to assemble, disassemble and store for the next season. This stand is made out of durable resin to ensure that it does not wear down due to moisture, rust or any other elements of exposure. It is one of the best Christmas tree stands for indoor and outdoor use.
Its workmanship gives it a more professional look and that way, you are sure to get this looking nice even in an office reception. The over 30 inches leg span keeps it stable even when holding a tree that is up to 10 feet in size.
- The clips tighten to accommodate the tree size
- It gives rust-free service
- It does not leave a mark on the floor
- Supports a 5 inch diameter trunk
- It is less effective when one or more of the clamps is lost
9. Good Tidings XTS1
The Good Tidings XTS1 Christmas tree stand is one of the few available tree stands that can still keep you refilling water to keep the tree fresh. The best Christmas tree stands have a wider base and can keep your trees stable even when gifts and other items are hung on them. This XTS1 model has a 23 inch base that will keep the tree free from sudden rocking. A separate tank receptacle can be fitted on top of the wide base so that once the tree has been fastened to it; some water can be filled to keep the tree leaves looking fresh from the garden.
It holds trees of a maximum diameter of 5.7 inches and weighs 2.27 pounds when fully assembled. Assembly only requires someone to put the tree on the top part of the stand, clamp it and lean the tree into place.
- The stand mechanism allows quick assembly
- The tree contains a separate reservoir to keep trees fresh
- It is easy to drain the tree without spills
- Over tightening can break the clamps
8. Goliath steel Stand
The Goliath steel Christmas tree stand (8-16 foot) is a welded steel stand with 4 removable legs and is meant to support trees of 8 to 16 feet capacity. It has a wide leg span and some padded leg ends to prevent abrasive action on tiled floors. The simplicity of its design is a big benefit as it has very few parts, meaning that you have less chances of loss if one of the parts is missing. It is one of the best Christmas tree stands because it is easy to assemble, does not weigh much and still does the job brilliantly. All that is required is for the tree to be placed on the receptacle and the screws tightened to grip the tree in place.
It has a green finishing made out of powdered stainless steel, giving the whole tree a natural matching look.
- It is easy to assemble
- The reservoir has a water holding capacity of 1.8 gallons
- It ships with a lifetime warranty
- Over-flooding the reservoir will lead to spills
7. Goliath steel tree stand at 5-12 foot
The Goliath steel Christmas tree stand (5-12 foot) is trendy yet simple welded steel stand with 4 metallic horizontal legs to provide more stability. This specific design looks similar to other Goliath Christmas tree stands but it differs in the capacity, as it is only meant for trees that are between 5 and 12 feet long while some can take larger trees. It is made up of a simple center piece of which the screws and stands are all attached to. This gives it a straight forward way to assemble it and operate it. It is one of the best Christmas tree stands if you foresee the tree being moved around a lot even after it has been mounted and decorated.
The powdered stainless steel structure gives it a classic look and keeps the tree well protected from moisture.
- The metal parts do not break off as easily as plastic stands
- The legs are horizontal and do not keep the tree leaning over
- The welds are professionally done
- It is possible to overflow the tank
6. Cinco express Christmas stand
The Cinco express C152E Christmas stand is a reliable and study item that will keep your tree upright and will not have stands that get too much into your way. It is made up of a single heavy duty polypropylene base that has 4 push-pull locks that fasten the tree in place. It is one of the best Christmas tree stands that are mostly in one piece. This makes unpacking and operation easier than most available stands in the market. It weighs 3.25 pounds and that can give you a sigh of relief knowing that it can support normal tree weights for Christmas trees that are up to 8 feet high.
You probably will not need a manual to erect your first tree while using the C152E model. With the 1.25 gallon capacity, you can have adequate water supply to keep the tree fresh for the season without many spills.
- The 1.25 gallon tank can keep the tree fresh for a long time
- It does not need much attention once the tree is set
- There is no need of any bottom drilling
- It is easy to store during offseason
- The clamps break easily sometimes
5. Good Tidings tabletop Stand
The Good Tidings tabletop Christmas tree stand is ideal for smaller trees that can be kept on room corners or on tables. You may not always need a very large tree. The C163 model is one of the best Christmas tree stands in case you ever need to have a tree that is less than 5 foot tall and do not want long stand legs over-shadowing the tree itself. It is made out of polypropylene resin that will not scratch the surfaces it is placed on and has metal twist locks to hold the tree. This keeps it easy to mount a tree as there is very little to no assembly needed.
You can trust this Christmas tree stand to hold trees and still keep them watered because it has a reservoir tank. This reservoir tank has just the right shape to prevent spills while keeping your tree stable.
- It does not have any parts that need assembly
- The tree stand is temperature and corrosion resistant
- Rust-proof spikes keep the tree from shifting around
- It is for a maximum 3 inch trunk
4. Jack Post Oasis Christmas tree stand
The Jack Post Oasis Christmas tree stand is a highly durable Christmas tree stand that can hold trees of up to 10 feet tall. The stand also acts like a basin reservoir that holds trees while keeping them watered. It is one of the best Christmas tree stands that come as a single center piece item. It consists of a tree stand and 5-eye bolts that are then fastened to grip the true upright and tight. Its 21 inch base will keep the tree stable enough and prevent toppling over even after the tree has been decorated. It is a good choice if you do not want to use metal stands and want some flexibility of the size of the trunk that can be used.
The assembly is quite simple and fast, while the Jack Post Oasis Christmas tree stand can also be washed and packed for the next season.
- It can be used for an up to 10 foot tree size
- It supports a 5 inch trunk
- The grip is made up of 5 T-nut tipped eye bolts
- Sometimes the nuts dig into the tree too deep
3. Cinco C148 stand
The Cinco C148 Christmas tree stand is a wide-base and stable alternative for buyers who do not want to have metal stands. The base is heavy enough (2.77 pounds) to keep the tree from toppling over while it also has 4 push-pull ratchets that are responsible for gripping the tree into the stand. The whole stand can support trees of up to 10 feet tall (3 meters). This can work for most of the tree sizes available for sale during Christmas season. The adjustable push-pull ratchets will also work for you if you prefer to harvest your own trees from a nearby farm. It is one of the best Christmas tree stands you should look at if you want tall trees for indoor and outdoor placement.
The stand does need any assembly apart from tightening the push-pull ratchets while mounting the tree.
- It is easy to assemble
- The stand is rust-resistant
- The wide base is stable enough for tall trees
- The stand has a different texture at the base to prevent skidding
- There is no disadvantage
2. National Tree Company folding stand
The National Tree Company folding Christmas tree stand works best for artificial trees that have a thinner tree stump. This item comes in handy when you have previously had an artificial tree and may have lost its stand or you simply cannot identify the maker of the artificial Christmas tree. It is one of the best Christmas tree stands that can be folded and packed away after usage. It is made out of non-corrosive green stainless steel and only needs folding and fastening the tree stamp into the holder. The base dimensions are 24 inches from leg-to-leg when fully assembled. It requires the tree to be tightened at the trunk opening using a push-pull ratchet.
The trunk opening measures 1.50” and that means that it can hold any artificial tree of that diameter or less. The stand supports trees measuring between 6 and 8 feet and is not meant to hold water in its trunk opening.
- It’s a good replacement for lost stands
- The stand supports trees up to 8 foot tall
- This stand is meant for artificial trees that ship without stands
- The stand does not fit one inch pole
1. Krinner Tree Genie stand
The Krinner Tree Genie Christmas tree stand is a fully non-assembly stand that still gets you setting up your Christmas tree with minimal effort. It is one of the best Christmas tree stands that only require the user to place the tree standing inside it and pumping the foot pedals until it fully grips the tree. The stump opening consists of some cable mechanisms that keep on tightening or loosening depending on where you what you want it to do. This interesting stand built by Krinner (of Germany) weighs 7 pounds and can therefore let you effortlessly erect Christmas trees of up to 12 feet tall and trunks of up to 7 inches in diameter.
- It uses foot pedals to tighten or loosen
- The stand doesn’t require assembly or batteries
- It can hold up to 2.5 gallons of water and has a water level indicator
- The stand does not hold the 6 inch diameter trunk of a 9 foot high tree
Getting a tree stand that can let you mount a specific tree height is not as hard as it sounds right? With the list of our best Christmas tree stands, you are sure to get a decent stand that will not keep you arguing about who did not hold the tree right before it fell. These items give a trouble-free way to hold your Christmas trees upright and with minimal effort.